Skip to end of metadata
Go to start of metadata

Follow these instructions to connect your Android device to the UNCA_PSK network.

If you have trouble following the instructions or connection to the wireless network, please contact the ITS Service Desk for direct assistance.


On this page:

Instructions Apply To:

Devices
  • Android smartphones
  • Android tablets
Operating System Versions
  • Android 4.0.4 (Ice Cream Sandwich) and below

Step-by-step guide

Important

You must have cookies enabled to successfully access the enrollment system.

  1. Find and make note of the MAC address for your device. For help with this, see How to Find Your MAC Address.

  2. Make sure that WiFi is turned on. Select UNCA_Setup from the list of available wireless networks.
  3. UNCA_Setup will redirect your web browser to the wireless configuration utility page. Agree to the Acceptable Use Policies and tap Start.
  4. Select Students, Faculty and Staff on the University Affiliation page.
  5. Enter your UNCA credentials and tap Log In.
  6. Select Alternative Access.
  7. Enter your MAC address and tap Register.
  8. Make note of the pre-shared key provided.
  9. Select UNCA_PSK from the list of available wireless networks. Enter the pre-shared key when prompted for password and tap Connect. You should now have full internet access over the UNCA_PSK network. Your device registration is valid for six (6) months, at which time you'll need to re-register.

 

  • No labels